| Peer-Reviewed

Parameter Study on the Elastic Recovery Rate of Polymer Micro-channel by Rolling Embossing Process

Received: 19 July 2017     Published: 19 July 2017
Views:       Downloads:
Abstract

To study the influence of process parameters on the elastic recovery rate of polymer micro-channel in the rolling embossing, the nonlinear finite element simulation software ABAQUS is employed. The simulated results show that the elastic recovery rate of micro-channel cross-section decreases with an increase of temperature and decrease of preloading and rolling speed. Using the orthogonal design method, the optimum temperature, preloading and rolling speed parameters can be obtained, the influence order of each factors is temperature>preloading height>rolling speed.

Published in International Journal of Materials Science and Applications (Volume 6, Issue 4)
DOI 10.11648/j.ijmsa.20170604.17
Page(s) 207-211
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Rolling Embossing Process, Finite Element Method, Elastic Recovery Rate, Orthogonal Test

References
[1] Byron D, Gates, qiaobing Xu, Michael Stewart, et al. New Approaches to Nanofabrication: Molding, Printing, and Other Techniques [J]. American Chemical Society. 2005, 4:1171-1196.
[2] Zheng Cui. Overview of micro/nano fabrication technologies of and application [J]. Physics.2006, 35 (1):34-39.
[3] Chou S Y, Krauss P R, Zhang W, et al. Sub-10 nm imprint lithography and application [J]. Vacuum Science & Technology.1997, 15 (16): 2897-2904.
[4] Yunjun Deng, Peiyun Yi, Linfa Peng, Xinmin Lai and Zhongqin Lin. Flow behavior of polymers during the roll-to-roll hot embossing process [J]. Journal of Micromechanics and Microengineering. 2015, 25: 1-10.
[5] Yong He, Jianzhong Fu, Zichen Chen. Study on polymer flow profile in micro hot embossing [J]. Optics and Precision Engineering. 2008, 16 (2): 270-277.
[6] C. Liu, J. M. Li, L. D. Wang. Deformation behavior of solid polymer during hot embossing process [J]. Microelectronic Engineering. 2009, 87: 200-2007.
[7] Song Xiao, Hongbo Lan, Hongmiao Tian. Polymer flow and filling behavior for electroosmosis-driven nanoimprint lithography [J]. Science China Press. 2016, 46 (6): 615-624.
[8] Lei Wan, Ning Zhu, Xuan Li. Optimization for solid polymer microstructure replication using gas-assisted hot embossing under low pressure [J]. International Journal of Precision Engineering and Manufacturing. 2016, 17 (8): 1067-1072.
[9] Shuhuai Lan, Hey-Jin Lee, Soo-Hun Lee. Experimental and numerical study on the viscoelastic property of polycarbonate near glass transition temperature for micro thermal imprint process [J]. Material and Design. 2009, 30: 3879-3884.
[10] Zhihong Fu, Jian Yu, Lingjiao Wei. The stress relaxation experiment and data processing analysis of polycarbonate [J]. Plastics Industry. 2014, 42 (6): 89-92.
[11] Yiping Shi, Yurong Zhou. ABAQUS Finite element analysis esamples [M]. Beijing: Machinery Industry Press. 2006: 9-361.
[12] Haixiong Wang, Yonghu Lv, Jibin Li. Hot compression elastic recovery experiments and modeling for polymethylmethacrylate [J]. Polymeric Material Science and Engineering. 2014, 30 (9): 97-100.
[13] Peixian Xu. Rheology of polymer and application [M]. Beijing: Chemical Industry Press. 2003: 49-78.
[14] Ping Chen, Chuanlin Tang, Mingyi Liao. Structure and Properties of Polymer [M]. Beijing: Chemical Industry Press. 2013: 67-12.
[15] Chengjun Zhang. Experimental design and data processing [M]. Beijing: Chemical Industry Press. 2009: 8-62.
[16] Jian Wang, Guosheng Zhao. MATLAB Mathematical modeling and simulation [M]. Beijing: Tsinghua University Press. 2016: 20-105.
Cite This Article
  • APA Style

    Cheng Jun-fei, Chen Xing. (2017). Parameter Study on the Elastic Recovery Rate of Polymer Micro-channel by Rolling Embossing Process. International Journal of Materials Science and Applications, 6(4), 207-211. https://doi.org/10.11648/j.ijmsa.20170604.17

    Copy | Download

    ACS Style

    Cheng Jun-fei; Chen Xing. Parameter Study on the Elastic Recovery Rate of Polymer Micro-channel by Rolling Embossing Process. Int. J. Mater. Sci. Appl. 2017, 6(4), 207-211. doi: 10.11648/j.ijmsa.20170604.17

    Copy | Download

    AMA Style

    Cheng Jun-fei, Chen Xing. Parameter Study on the Elastic Recovery Rate of Polymer Micro-channel by Rolling Embossing Process. Int J Mater Sci Appl. 2017;6(4):207-211. doi: 10.11648/j.ijmsa.20170604.17

    Copy | Download

  • @article{10.11648/j.ijmsa.20170604.17,
      author = {Cheng Jun-fei and Chen Xing},
      title = {Parameter Study on the Elastic Recovery Rate of Polymer Micro-channel by Rolling Embossing Process},
      journal = {International Journal of Materials Science and Applications},
      volume = {6},
      number = {4},
      pages = {207-211},
      doi = {10.11648/j.ijmsa.20170604.17},
      url = {https://doi.org/10.11648/j.ijmsa.20170604.17},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20170604.17},
      abstract = {To study the influence of process parameters on the elastic recovery rate of polymer micro-channel in the rolling embossing, the nonlinear finite element simulation software ABAQUS is employed. The simulated results show that the elastic recovery rate of micro-channel cross-section decreases with an increase of temperature and decrease of preloading and rolling speed. Using the orthogonal design method, the optimum temperature, preloading and rolling speed parameters can be obtained, the influence order of each factors is temperature>preloading height>rolling speed.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Parameter Study on the Elastic Recovery Rate of Polymer Micro-channel by Rolling Embossing Process
    AU  - Cheng Jun-fei
    AU  - Chen Xing
    Y1  - 2017/07/19
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ijmsa.20170604.17
    DO  - 10.11648/j.ijmsa.20170604.17
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 207
    EP  - 211
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20170604.17
    AB  - To study the influence of process parameters on the elastic recovery rate of polymer micro-channel in the rolling embossing, the nonlinear finite element simulation software ABAQUS is employed. The simulated results show that the elastic recovery rate of micro-channel cross-section decreases with an increase of temperature and decrease of preloading and rolling speed. Using the orthogonal design method, the optimum temperature, preloading and rolling speed parameters can be obtained, the influence order of each factors is temperature>preloading height>rolling speed.
    VL  - 6
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • Faculty of Mechanical and Mechanics, Ningbo University, Ningbo, China

  • State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan, China

  • Sections